Wellcare Medical Systems

The Covidien LF1937 is a laparoscopic Maryland-jaw vessel sealer/divider with a 37 cm length, 5 mm diameter, and a 350-degree shaft rotation. It features a curved jaw and a nano-coating for improved efficiency, and its seal plate is 20.3 mm long. This disposable and sterile instrument is compatible with the Valleylab FT10 Energy Platform. Key specifications

• Model: Covidien LF1937
• Type: Laparoscopic Maryland-jaw sealer/divider
• Length: 37 cm
• Diameter: 5 mm
• Jaw Design: Curved
• Seal Plate Length: 20.3 mm
• Shaft Rotation: 350 degrees
• Features: Nano-coating for a non-stick surface
• Material: Stainless steel
• Disposability: Disposable
• Sterility: Sterile 

The LigaSure LF1923 is a 23 cm, disposable, sterile, curved Maryland-jaw open sealer/divider from Medtronic/Covidien that seals vessels up to 7 mm in diameter. Key features include a nonstick nano-coating to reduce sticking, 350-degree rotation for improved access, and compatibility with Valleylab FT10 and LS10 energy generators. 

 the 10mm Laparoscopic Spoon Forceps are specialized, reusable, and autoclacvable surgical instruments primarily used for gripping, manipulating, and retrieving tissues or stones (like gallstones) during minimally invasive surgery. Technical Specifications

• Diameter: 10 mm (compatible with standard 10mm laparoscopic ports)
• Working Length: Commonly 330 mm (33 cm); some models available in 320mm or 450mm
• Jaw Type: Spoon-shaped/concave, often Single Action or Dual Action
• Material: High-grade Stainless Steel (often AISI 420 or medical-grade)
• Sterilization: Fully autoclavable
• Handle Type: Ergonomic design (often with 360° rotational capability)
• Usage: Reusable 

Key Features

• Atraumatic Design: Spoon-shaped jaws allow for secure grasping and holding of delicate tissues, stones, or foreign bodies without causing damage.
• Rotatable Shaft: 360-degree rotation for improved access in complex, confined, or difficult-to-reach areas.
• Construction: Durable, corrosion-resistant stainless steel.
• Modular Design: Some models are detachable (3-piece system: handle, shaft, jaw insert) for thorough cleaning and maintenance. 

Applications

• Stone Removal: Primary instrument for retrieving spilled gallstones during cholecystectomy.
• Tissue Handling: Used for manipulating delicate tissue like fallopian tubes, ovaries, and intestines.
• Retraction & Dissection: Used for holding tissues and performing dissection. 

The Covidien LF1944 is a sterile, 44 cm long, 5 mm diameter laparoscopic Maryland jaw sealer/divider for use in various surgical procedures.  Key specifications

• Model Number: LF1944
• Device Type: LigaSure Maryland Jaw Laparoscopic Sealer/Divider
• Diameter: 5 mm
• Length: 44 cm (one of three available lengths, including 23 and 37 cm)
• Seal Plate Length: 20.3 cm
• Cut Length: 18.5 cm
• Jaw Design: Curved, Maryland jaw
• Rotation: 350°
• Sterility: Sterile
• Usability: Disposable
• Compatibility: Valleylab™ FT10, Valleylab™ LS10, and ForceTriad™ energy platforms
• Coating: Non-stick nano-coating
• Application: Used in laparoscopic surgeries such as general, urological, vascular, thoracic, and gynecological procedures 

The Covidien ProTack 5mm fixation device is a single-use, sterile instrument made of titanium for surgically attaching prosthetic materials to soft tissue. Key specifications include a helical fastener design, a 5mm instrument diameter, a 35.5cm shaft length, and 30 tacks per device, making it suitable for minimally invasive procedures through 5mm port

• 
  
  

e Ethicon Harmonic HP054 is a reusable, autoclavable ultrasonic handpiece (often blue) designed to convert electrical energy from Ethicon generators (GEN11/G300) into mechanical energy for precise soft tissue cutting and coagulation. Key specs include a 55.5 kHz operating frequency, a 3-meter cable, and compatibility with various Harmonic shears/blades. 
Key Technical Specifications & Features:

Model Number: HP054 (often referred to as HP Blue).

Operating Frequency: ~55.5 kHz.

Compatibility: Compatible with GEN11 Harmonic Generator and legacy GEN4 (G300) generators.

Handpiece Type: Reusable, autoclavable.

Cable Length: Approximately  (10 ft).

Instrument Compatibility: Designed for use with HARMONIC FOCUS™+ Shears and Harmonic Shears (e.g., HAR23, HAR36, HARH23, HARH36, HARH45).

Function: Simultaneous cutting and coagulation with minimal thermal spread. 

Application:
The HP054 is used in both open and laparoscopic procedures for sealing and dissecting tissue

The items in the image are likely endoscope connectors or couplers, which are precision-machined metal components used to connect an endoscope to a camera head or video processor. Specific technical specifications for these exact parts cannot be determined without a manufacturer's datasheet or part number, as they are custom components. However, general specifications for such medical-grade connectors typically include: 

• Material: Often made from high-durability, autoclavable metals like stainless steel to withstand repeated sterilization processes. 
• Connection Type: Commonly feature a C-mount thread for compatibility with various imaging devices. 
• Functionality: Designed for secure and reliable transmission of high-resolution images and videos. They may also contain pathways for light, air, water, and suction channels depending on the specific design. 
• Durability: Built to be robust and reliable for demanding medical environments. 
• Dimensions: Diameters, lengths, and thread sizes are precisely engineered to fit specific endoscope and camera systems. 

Endoscopy instruments, primarily consisting of the endoscope and its accessories, have specific technical parameters designed for minimally invasive procedures. Key specifications for the endoscope itself include its working length, typically ranging from 1000 mm for gastroscopes to over 1600 mm for colonoscopes, and a slim insertion tube outer diameter (e.g., 9-13 mm for adult GI scopes, less for pediatric or specialty scopes). The instrument features an internal working channel diameter (typically 2.8 mm to over 4.2 mm) to allow the passage of ancillary tools like biopsy forceps or snares. 

Clip applicators are surgical tools used to apply clips (made of absorbable or non-absorbable materials) to tissues or blood vessels during minimally invasive procedures like laparoscopy. These clips help control bleeding (hemostasis), close small openings, or secure tissues. They are particularly useful in procedures like gallbladder removal, hernia repair, and appendectomies. 

The Covidien LF1212 LigaSure Small Jaw Open Sealer/Divider is a 18.8 cm (7.4 in) sterile, single-use instrument for open surgery featuring a 28° curved jaw, 16.5 mm seal length, and 14.7 mm cut length. Designed for precise sealing (up to 7 mm vessels) in confined spaces, it offers hand-activation, low thermal spread, and is compatible with the Valleylab FT10 and LS10 generators. 
Key Specifications & Features (Model LF1212)

• Instrument Length: 18.8 cm (7.4 inches)
• Jaw Angle: 28° Curved
• Seal Length: 16.5 mm
• Cut Length: 14.7 mm
• Vessel Sealing: Fuses vessels up to and including 7 mm
• Thermal Spread: Average 
• Activation: Hand switch (compatible with foot pedal depending on setup)
• Generator Compatibility: Valleylab™ FT10, LS10, and ForceTriad™
• Configuration: Sterile, single-use, 6 units per box IndiaMART +3

Clinical Applications
The LF1212 is designed for open surgical procedures, including thyroidectomy, bowel resection, gallbladder surgery, adhesiolysis, and ENT/thoracic applications. It is particularly utilized for its ability to operate in confined spaces where access and visibility are limited. 

We are offering a wide gamut of Needle Holder (Ethicon Type) in the market. These are manufactured from best quality material under the supervision of highly skilled professionals at state of art infrastructure unit and these are safe to use, reliable, dimensionally accurate and have longer life. Our clients can avail these products at industry leading price from us. Also these products can be avail from us in various specifications.

Features:

• Dimensionally accuracy
• Highly precise
• Easy to use

Specification:

• 5mm & 3mm

A Port Closure Cobbler Needle is a reusable, stainless steel surgical instrument with a curved design (often right/left options) used in laparoscopic surgery to pass sutures for fascial closure, preventing hernias, with key specs including  length (330mm), and material (surgical stainless steel), featuring an ergonomic handle for maneuverability and being autoclavable for sterilization. Key Specifications

• Material: Surgical Grade Stainless Steel (durable, sterilizable)
• Length:  330mm
• Design: Curved (right/left options), ergonomic handle (often ABS plastic) for control, sharp tip for penetration.
• Type: Reusable, Autoclavable (can be sterilized for multiple uses).
• Application: Laparoscopic port site closure (fascial layer), reducing hernia risk, single-step closure without port removal. 

Features & Benefits

• Minimally Invasive: Closes deep fascial layers without large incisions.
• Cost-Effective: Reusable design saves money on disposable instruments.
• Precision: Allows controlled suture placement, ensuring secure closure. 

Laparoscopic 10mm claw forceps are specialized, reusable, stainless steel instruments designed for grasping, manipulating, and extracting tissue (typically the gallbladder) during minimally invasive surgery. Key specifications include a  diameter,  to  working length, 360-degree rotation, and traumatic toothed jaws for secure grip. 

• Diameter:  (compatible with standard  or  trocars).
• Working Length: Typically  () or  ().
• Material: High-grade surgical stainless steel.
• Tip Design: Claw-shaped (often 2x3 or 3x4 teeth) for secure, traumatic grasping.
• Action: Single Action (standard) or Double Action.
• Handle: Ergonomic, with 360-degree rotation capability for improved, precise positioning.
• Usage: Reusable and fully autoclavable (sterilizable).
• Application: Primarily used as a gall bladder extractor during laparoscopic cholecystectomy

wellcare medical system is one of the best manufactures leading company...which provide you best products.We are offering a wide gamut ofAspiration Needle n the market. These are manufactured from best quality material under the supervision of highly skilled professionals at state of art infrastructure unit and these are safe to use, reliable, dimensionally accurate and have longer life. Our clients can avail these products at industry leading price from us. Also these products can be avail from us in various specifications.
 is one of the product.....we provide you best quality and best price of the Aspiration needle.which is best for you.Hope you will like you.

A Double-J (DJ) stent is a small, flexible tube, typically made of polyurethane or silicone, used to temporarily drain urine from the kidney to the bladder. It's placed during or after certain urinary tract surgeries, primarily to help the ureter heal or to facilitate urine flow when there's an

We are one of the best manufactures leading company..and we provide you Best Quality of Knot Pusher clark and best price and good quality...of Knot Pusher Clark. is appreciated amongst the clients for seamless performance, hi tech technology and smooth finishing.

A 5mm laparoscopic curved needle holder is a, typically, reusable, 330mm-360mm long stainless steel surgical instrument used for suturing in minimally invasive procedures. Featuring a 5mm shaft compatible with standard trocars, it includes curved jaws, frequently reinforced with Tungsten Carbide, for secure, precise needle manipulation in confined spaces, often with a 360-degree rotation mechanism. Key Specifications

• Diameter: 5 mm
• Working Length: Typically 330 mm to 360 mm
• Jaw Configuration: Curved (left-curved or right-curved options available for angled access)
• Material: High-grade Surgical Stainless Steel
• Tip Material: Tungsten Carbide (TC) inserts for better grip and durability
• Handle Type: Available in axial (straight), ring-handle, or pistol-grip (gun-type) with locking/unlocking ratchet
• Sterilization: Reusable and autoclavable
• Functionality: Often includes 360-degree shaft rotation for improved ergonomics 

This is a laparoscopic trumpet suction irrigation cannula, a reusable surgical instrument used during minimally invasive procedures. 

• It combines both suction and irrigation capabilities, allowing a surgeon to clear the surgical field of fluids and debris. 
• The trumpet-shaped valve enables seamless switching between suctioning and irrigating. 
• It is typically made from medical-grade, anti-corrosive stainless steel. 
• The instrument is designed for use in keyhole surgeries, fitting through small openings to minimize patient trauma.